09 300 7777

MOTORCYCLES

RESIDENTIAL

MOTORHOME

MARINE

IndustRIAL

Heavy GOODS

Directions for use

  1. WASHCOAT is supplied ready to use so no mixing is required.

  2. Always wash out of direct sunlight on a cool surface.

  3. Before you begin foaming we advise you hose your boat/watercraft down with water to remove excessive debris. 

  4. Start foaming the lower sections first. Once foam is applied agitate the foam with a soft brush then rinse with a gentle stream of water to finish off.

  5. Now "foam"from the bottom to the top of one side of the ​boat/watercraft. Once completely covered in foam, start cleaning your way down from the top to the bottom of the ​boat/watercraft using a non scratch Wash-mitt (We recommend the Weekend Warrior HD Wash Mitt, part # WW5150 ) so as not to scratch delicate paint and chrome finishes.

  6. Rinse off with a gentle stream of water to finish.
    Repeat the process on the other side of the​boat/watercraft  and you're done!

The more you wash the better the results.

WASHCOAT has been scientifically formulated to provide Ultra-Saturation of the surface being cleaned.

Unlike others, WASHCOAT's Super-Wet Foam penetrates dirt and grime completely, quickly breaking down contaminates and their ability to adhere to paint, plastic, glass or metal surfaces.

Washcoat leaves an incredible shine to everything it coats and is truly unique as it is charged with millions of acrylic polymers that bond to the surface, providing you the ultimate long lasting protection while making everything sparkle like new. 

 Our patented Acrylionic Formula not only cleans and revitalises the surface, but increases the shine with each wash.